About Us
Delivery Information
Pay Securely
Site Security
Site Terms
Cant find the item you require?

Plumbprice.comCall us free on 0800 0432419Free Delivery


BY TOTAL BATHROOMS - Tel: 01246 550199





Showerwall Specification

Showerwall Panels are constructed with a Moisture Resistant MDF core bonded under controlled conditions with high pressure decorative laminate to face and a balancing laminate to rear.

Showerwall Tongue and Groove Panels have a machined profiled edge for joining the panels together without using aluminium extrusion and when sealed with Showerwall sealant produces a watertight Joint that is quick and easy to install.

Size Weight
600mm 15kg
900mm 25kg
1000mm 25kg
1200mm 30kg

Panel can be cut if required

Size Tolerances

Width -/+ 3mm
Height -/+ 5mm
Thickness -/+ 0.5mm
Flatness -/+ 1.5mm bow per 600mm length

Décors 24 patterns available - click here to view them

Accessories Showerwall Aluminium extrusions are available in 4 profiles and 5 finishes. Each 2450mm in length.

Profile – Internal 90 degree corner, External 90 degree corner, Joining H & End U section Finish – Bright Silver, Satin Silver, Gloss White, Antique Gold & Anthracite Silk

Fire Rating Showerwall Panels has an equivalent to Class 2 fire rating in accordance with BS 476 : Part 7 : 1997








Tips for working with Laminate Panels


When cutting the panels to width and height using a handsaw, the decorative face should be facing upwards.When cutting with a jigsaw or circular saw, the decorative face should be facing downwards.


A clearance of 2-3mm should be left where pipes or fittings come through the panel even where collars are to be fitted. The clearance should then be filled with Wetwall silicone sealant.


If a Wetseal is not being fitted then a 3-4mm gap should be left between the bottom of the panel and the shower tray or bath by using packers when fixing panels. The gaps should then be sealed using Wetwall silicone sealant. Wetwall silicone sealant should also be used in all the corner and capping profiles. See video below if using Wetseal kit.

Wall Surfaces

The panels can be fixed to most surfaces using adhesive, providing they are sound and free from loose particles.
The panels can also be fixed directly onto existing tiling providing they have been de-greased.


Fittings and shower attachments can be fixed directly to the panels using suitable fixings. Heavier items such as sanitary ware and accessible furniture will require the provision of additional support behind the panels.

Standard Installation

Two Sided Shower

1. Fit an internal corner profile into the corner using appropriate fixings (screws), ensuring that the heads are countersunk to prevent fouling when fitting the panel.

2. Remove the film from the face of the panel and check for defects prior to cutting to size.

3. Apply a bead of sealant into one side of the internal corner profile, the amount of sealant applied should cover the channel bottom to a depth of at least 2mm.

4. The panels should be fitted such that a gap is formed between the bottom of the panels and the shower tray of between 3-4mm this should be filed with sealant and cleaned off flush with the front of the panels once all the panels have been fitted. (If using a wetseal profile kit please refer to the instructions provided within kit - and refer to video below).

5. If end cap profiles are being used then these should be fitted to the outer edges of the panel now.

6. Apply a generous amount of adhesive in “snakes” to the panel and fit into place ensuring that the edge of the panel is inserted into the internal corner and a good seal achieved.

7. Repeat sections 2-6 for the second panel.


telephonePLEASE CALL US FREE OF CHARGE ON 0800 0432419 or STANDARD RATE 01246 550199